JensenBest PHOTOGRAPHIC AND STUDIO LIGHTING

THE 16 CHANNEL RADIO TRIGGER SYSTEM IS DESIGNED FOR PHOTOGRAPHIC STUDIOS AND ON LOCATION PHOTOGRAPHIC WORK TO TRIGGER YOUR STROBE/FLASH. IT WORKS WITH ALL OF THE STROBE/FLASH UNITS THAT WE SELL. THE TRANSMITTER FITS ON YOUR CAMERAS HOTSHOE AND THE RECEIVER CONNECTS VIA THE SYNC CORD OUTLET TO YOUR FLASH. IT HAS A REMOTE DISTANCE OF  APPROXIMATELY 35FT.  REQUIRES 2 AAA BATTERIES, INCLUDED.

General Description

The Radio Trigger System is designed for photographic studios and on-location work to trigger various flash lights and strobes.  The standard pack is composed of one Radio Trigger and one self-locking Radio Receiver.  Since it has multiple channels, the triggering delay is 1/6000 second and can satisfy the synchronous flashlight request of various shutters.

Features

1. Micro-computer control.
2. 1/6000 second Triggering delay.
3. Multiple channels which work without interference of each other.
4. Receiver searches for channel automatically.
5. Receiver has LED indicator light.
6. Long lifetime of internal transmitter battery- over 20,000 continuous triggers.
7. Receiver uses two AAA batteries (lifetime varies).
8. Receiver comes with various sync cord adapters for different strobes.
9. Small and stylish.

Operation

1. Insert 2 AAA batteries into the DRT Receiver in correct +/- direction.  (Your DRT Trigger comes with a pre-installed 23A battery.)
2. 2. Connect DRT Receiver with your strobe using the included adapter.  Press the power switch of the DRT Receiver.
3. Press the test button on the DRT Trigger.  You should see the LED on th DRT Receiver twinkling and your strobe flashing.  It means that the DRT has locked one channel and is prepared to work.
4. 3.To change the Channel you need to slide the channel switch of DRT Trigger and press the power switch twice to reset the DRT Receiver.
5. Receive step 3 to lock the channel.
6. Install your DRT Trigger on the hot-shoe plate of your camera.  Or connect the DRT Trigger with your camera using included sync cord.
7. The DRT may work with more than on Trigger or Receiver.
8. You can switch the power switch off to increase lifetime of batteries.
9. It is time to change the batteries for your DRT Radio Trigger System when there is missing triggering or self triggering.
10. Uninstall the batteries of DRT Receiver if you will not use it for a long time.

TROUBLESHOOTING YOUR RADIO TRIGGER DEVICE